Downstream Pilot Operated Pressure Regulator B3 Series
The B3 Series is twin pilot operated regulator system used for highly accurate pressure control in very low pressure blanketing applications. This reduces a high pressure of inert gas, such as nitrogen to preserve a protecting environment above any liquid stored in a tank or vessel, when the liquid is being pumped out or also when the vessel is rapidly cooled, causing vapors inside the tank vessel to contract. The Regulator System rushes in blanketing gas to replace the volume of contracting vapors to prevent the internal tank pressure from decreasing. A small positive pressure prevents outside air, moisture & other contaminants from entering the tank & the possible collapse of the tank. The B3 Series regulator system includes the Main regulator (MPCV), Pilot feed regulator (PFR), Response adjusting device (RAD) & Sensing pilot (PSCV).
Downstream Pilot Operated Pressure Regulator DP 3100 Series
SERIES DP3100 is pilot loaded (self actuated) pressure regulators for general purpose pressure regulating applications. These regulators are best suited for delivering constant reduced pressure of pre-filtered, non-corrosive gases used in industrial, commercial & process plant applications. Double stage pilot provides excellent control of outlet pressure with versatile turn down ratio. Additionally the main regulator balanced trim design with external sensing exhibits excellent control of downstream pressure even with very high variations in inlet pressure.
Upstream Pressure Regulator PB Series
The PB series pilot operated upstream pressure control valves are pressure relief valves which combine sensitivity with the stability of the controlled pressure. These valves can react to very small changes in controlled pressure. Due to the pressure loaded design, differential pressure across the main valve diaphragm is minimum. Hence, these valves are also suitable for high pressure setting. Different pilot and main valve actuators are available to cover wide range of pressure and flow requirements.
Upstream Pressure Regulator BP Series
The BP Series are general purpose self operated pressure relieving upstream pressure regulator suitable for controlling many kinds of fluids. These pressure regulators open in proportion to the rise in inlet pressure beyond set value. Different soft sealing discs are available for various fluids for wide pressure and temperature range upto 200Ã°C. The metal sealing surface used at higher temperature is carefully lapped to ensure shut off. These Back pressure Regulating Valves are also well suited for high & varying differential pressures. This valve can be used for pressure setting lower than 1500 mmWcg (0.15 barg) with different configurations.
Tank Blanketing System
In refineries & chemicals plants explosive hazards occur if air enters tanks containing volatile flammable liquid during pumping operation. When liquid is removed from a tank or an ambient temperature reduces, vacuum may develop.
Downstream Direct Acting Pressure Regulator D81 Series
The D81 Series, High performance, High pressure lever type regulator is a direct acting (self actuated spring loaded) regulator, which can be used for all non-aggressive gases. This construction feature i.e. the lever mechanism ensures exact outlet pressure and provides quick response when the flow rate varies .Typical application includes for residential, commercial, industrial applications and also as by-pass regulators for pressure reducing station, first-cut regulator ideal for use in multistage pressure reduction.
Downstream Direct Acting Pressure Regulator DM/DL Series
DM/ DL- Series
The DM and DL series are general purpose self operated pressure reducing regulators, suitable for controlling many kinds of fluids. These self acting control valves keep the outlet pressure constant irrespective of variation in inlet pressure and flow through the valve. Different soft sealing discs are available for various fluids for wide pressure and temperature range up to 190°C. Stainless Steel diaphragms are available for higher temperatures & steam service. These regulators have built in safety feature against high inlet pressure. The DL series valves are a variation of DM series, generally used for pressure settings lower than 1500 mm WCg (0.15 bar g). The DL series valves can control downstream pressure as low as 40 mm WCg.
Series H100 & H200 are compact hydrogen pressure regulation station ideally designed for cylinder cascade / trolley or cylinder unloading. This standardized station is cost effective solution for applications where hydrogen gas at constant controlled pressure is desired for hydrogenation process in the industries such as pharmaceutical, chemical, edible oil, aromatics, etc..
High accuracy in control of final outlet pressure supplied to process is guaranteed with two stage pressure reduction, despite varying inlet pressure as cylinder get emptied from full pressure of 200 Bar down to almost pressure required at outlet. The high pressure side components of the station are designed for operating pressure of 210 Bar (3000 psi).
Upstream Pressure Regulators B42 Series
Safety Relief Valve SR-07 Series
The SR-07 are spring loaded safety relief valves, specially designed and manufactured to API 526. These valves have been optimized in close cooperation with plant engineers and service specialists, simplifying design with fewer components for less down time, fewer spare parts and lower maintenance costs.
SR-07 has been engineered and designed to provide high quality performance standards for over pressure protection for air, gas, steam and vapour as well as liquid phase applications. This valve provides highly effective solution for various applications as in refineries, chemical industry, fertilizer plant, petrochemical industry, Oil & Gas Industry, Storage tank systems etc.
Solution for Industrial Gas
We offer complete Gas Cylinder Manifold & High Pressure Reducing Stations for Nitrogen, Carbon dioxide, Oxygen, Argon, Amonia, Chlorine and other gases with following features:
Skid mounted ready to use package
Two stage pressure reduction ensuring constant outlet pressure, irrespective of extensive variation in inlet pressure and flow rate.
Completely Self Actuated system without auxiliary power requirement.
Short Payback period as high capacity typical two stage reduction allows maximum utilization of gas from the Cylinder / Trolley.
BV-100 & BV-101 series valves are highly developed pressure and vacuum relief valves with excellent flow performance. These valves are relief valves for atmospheric tanks & vessels in which solvents are filled and drawn at a high flow rate. This valve is installed in the in-and out breathing lines of tanks, vessels and process equipments to protect against unpredicted fluctuations in pressure & vacuum. By retaining toxic vapors and avoiding atmospheric contamination, these valves provide increased fire protection and safety.
The accidental ignition of flammable gases or vapours from vent pipes of storage tank or process vessel presents a constant threat to plant and personnel. The use of the flame arrestors is one of the essential measures taken to avoid or minimize the possible consequences. Their application is widespread, ranging from the protection of small solvent tanks to the safety of large and complex process plant. The oil, gas, petroleum, chemical and petrochemical industries are major users.
Safety Relief Valve SR 08 Series
The SR-08 are screwed safety relief valves, specially designed and manufactured to API 520/527. These valves have been optimized in close cooperation with plant engineers and service specialists, simplifying design with fewer components for less down time, fewer spare parts and lower maintenance costs.
SR-08 has been engineered and designed to provide high quality performance standards for over pressure protection for air, gas, steam and vapour as well as liquid phase applications. This valve provides highly effective solution for various applications as in Pharmaceuticals, Refineries, Chemical Industry, Fertilizer Plant, Petrochemical Industry, Oil & Gas Industry, Storage Tank Systems etc.
Downstream Direct Acting Pressure Regulator D82 Series
The D82, High performance, High pressure lever type regulator is a direct acting spring loaded regulator, which can be used for all non-aggressive gases. The lever mechanism ensures exact outlet pressure and provides quick response when the flow rate varies .Typical application includes for commercial & industrial, fuel gas applications and many industrial utility applications.
Downstream Direct Acting Pressure Regulator D62 Series
Series D62 regulator is a lever type direct acting spring loaded regulator for applications where sudden flow capacity variations are required. Typical applications include industrial, commercial gas burner applications and combustion systems as well as Nitrogen blanketing and purging applications.
The regulators are designed to maintain low pressure with high inlet pressure upto 10.0 barg. These regulators has been devised keeping in mind the maintenance and ease of replacement of seals without removing the body from the pipeline.
Downstream Direct Acting Pressure Regulator DH Series
The DH Series High Pressure, High Performance, Inlet Pressure Balanced, Direct acting Regulator can be used for almost all kind of service & environments. This type of valve handles very high inlet pressure up to 210 bar(g) & higher. Due to balanced design, effect of inlet pressure variations on set pressure is minimized. The controlled downstream pressure remains constant irrespective of large changes in inlet pressure and flow as these valves have very high flow capacity. Typical application includes for commercial, industrial applications for consuming high flow rates from bank of cylinders / trolley and first stage regulator for use in multistage pressure reduction.
Downstream Direct Acting Pressure Regulator DMB Series
SERIES DMB is direct acting (self actuated spring loaded) pressure regulators for general purpose pressure regulating applications. These regulators are best suited for delivering constant reduced pressure of pre-filtered, non-corrosive gases & liquids used in industrial, commercial & process plant applications.
The balanced trim design with internal sensing exhibits excellent control of downstream pressure even with very high variations in inlet pressure.
Downstream Direct Acting Pressure Regulator D61 Series
The SERIES D61 is direct acting (spring loaded) regulators for cost-effective and very low pressure regulation applications. These regulators are best suited for industrial, commercial gas burner applications & combustion systems.
The compact construction is ideally suitable for Tank blanketing application. The regulators are designed to maintain very low pressure with high inlet pressure upto 11 Barg (159.4 Psig).
Centrifuge Blanketing System
Centrifuge Blanketing System
Nirmal Offers Skid Mounted ready to use , continuous Innertisation (Blanketing & Purging) systems for safe operation of centrifuges. Salient features are:
Ensures presence of N2 in the Basket and Bearing Housing & ML Tank
Reduce oxygen content in the Basket & Bearing Housing and eliminates the possibility of hazard / fire
Completely Self actuated system without auxiliary power with lower & over pressure indication / alarm
Low set point technology results in very low nitrogen consumption.
Simple In Design
Available in Automated & Manual Option.
Downstream Direct Acting Pressure Regulator D41 Series
The D41 Series pilot operated pressure regulators are downstream pressure regulator of rugged construction, designed specifically to handle high flow rates. Different pilot and main valve combinations are available to cover wide range of pressure and flow requirements. Valve body & trim are available in various material of construction for process fluid compatibility.